Programmable Read Only Memory (PROM):

Fig. 3.71 shows four byte Programmable Read Only Memory (PROM). It has diodes in every bit position; therefore, the output is initially all 0s. Each diode, however has a fusible link in series with it.

Programmable Read Only Memory (PROM)

By addressing bit and applying proper current pulse at the corresponding output, we can blow out the fuse, storing logic 1 at that bit position. The fuse uses material like nichrome and polycrystalline. For blowing the fuse it is necessary to pass around 20 to 50 mA of current for period 5 to 20 μs.

The blowing of fuses according to the truth table is called programming of ROM. The user can program PROMs with special PROMs programmer. The PROMs programmer selectively burns the fuses according to the bit pattern to be stored. This process is also known as burning of PROM. The PROMs are one time programmable. Once programmed, the information stored is permanent.

Related posts:

  1. Erasable Programmable Read Only Memory (EPROM)
  2. EEPROM (Electrically Erasable Programmable Read Only Memory)
  3. Read Only Memory (ROM)
  4. What is Semiconductor Memory?
  5. ROM Memory
  6. NVRAM (Non Volatile Random Access Memory)
  7. What is Flash Memory in Digital Electronics?
  8. Digital Memory Waveform Recorder (DWR)
  9. Memory Interfacing in 8085
  10. Memory Addressing Modes of 8086
  11. 8096 Memory Space
  12. Cache Memory in Pentium Processor
  13. Programmable Logic Array (PLA)
  14. Programmable Array Logic (PAL)
  15. Features of 8259 Programmable Interrupt Controller
  16. 8259 Programmable Interrupt Controller
  17. Features of Intel 8279 Programmable Keyboard Display Interface
  18. Programmable Unijunction Transistor
  19. 8259A Programmable Interrupt Controller
  20. 8255A Programmable Peripheral Interface