First Order High Pass Butterworth Filter Derivation:

First Order High Pass Butterworth Filter Derivation – High pass filters are often formed by interchanging frequency determining resistors and capacitors in a low pass filter.

A first order high pass filter is formed from a first order low pass type by interchanging components R and C.

Figure 15.12 shows a first order high pass Butterworth filter with a low cutoff frequency fL, the frequency at which the magnitude of the gain is 0.707 times its pass band value. All frequencies higher than fL are in the pass band with the highest frequency determined by the closed loop band width of the opamp.

First Order High Pass Butterworth Filter Derivation

For the first order high pass filter, the output voltage is

or

where

  • AF = 1 + RF/R1 – pass band gain of the filter
  • f = frequency of the input signal
  • fL= 1/(2 Ï€ R C) – low cutoff frequency

Hence the magnitude of the voltage gain is

The frequency scaling procedures are the same as for the low pass filter because high pass filters are formed from low pass filters by simply inter­changing Rs and Cs.

Related posts:

  1. Second Order High Pass Butterworth Filter Derivation
  2. Second Order Low Pass Butterworth Filter Derivation
  3. First Order High Pass Butterworth Filter
  4. Second Order High Pass Butterworth Filter
  5. First Order Low Pass Butterworth Filter
  6. Second Order Low Pass Butterworth Filter
  7. Frequency Response for Low Pass Filter and High Pass Filter
  8. High Pass RC Circuit Diagram, Derivation and Application
  9. High Pass Filter
  10. m Derived High Pass Filter
  11. Low Pass RC Circuit Diagram, Derivation and Application
  12. Higher Order Filter Design
  13. Low Pass Filter Circuits
  14. Band Pass Filter Circuit Diagram
  15. All Pass Filter Design
  16. Low Pass Filter
  17. Band Pass Filter
  18. m Derived Low Pass Filter
  19. m Derived Band Pass Filter
  20. Normalized Low Pass Filter Characteristics