Derivation of Transmission Loss Formula: An accurate method of obtaining a general derivation of transmission loss formula has been given by Kron. This, however, is quite complicated. The aim of this article is to give…
Optimum Generation Scheduling: Optimum Generation Scheduling - From the unit commitment table of a given plant, the fuel cost curve of the plant can be determined in the form of a polynomial of suitable degree…
Reliability Consideration in Power System: With the increasing dependence of industry, agriculture and day-to-day household comfort upon the continuity of electric supply, the Reliability Consideration in Power System has assumed great importance. Every electric utility…
Optimal Unit Commitment (UC): As is evident, it is not economical to run all the units available all the time. To determine the units of a plant that should operate for a particular load is…
Optimal Operation of Generators on a Bus Bar: Optimal Operation of Generators on a Bus Bar - The major component of generator operating cost is the fuel input/hour, while maintenance contributes only to a small…
Introduction to Optimal System Operation: The optimal system operation, in general, involved the consideration of economy of operation, system security, emissions at certain fossil-fuel plants, optimal releases of water at hydro generation, etc. All these…
Voltage Profile of Transmission Line: Control of Voltage Profile of Transmission Line at the receiving bus in the fundamental two-bus system was discussed already. Though the same general conclusions hold for an interconnected system, it…
Comparison of Gauss Seidel and Newton Raphson Load Flow Methods: Comparison of Gauss Seidel and Newton Raphson Load Flow Methods, when both use YBUS as the network model. It is experienced that the Gauss Seidel method…
Decoupled Load Flow Methods (DLF): An important characteristic of any practical electric power transmission system operating in steady state is the strong interdependence between real powers and bus voltages angles and between reactive powers and…
Newton Raphson Method for Load Flow Analysis: The Newton Raphson Method for Load Flow Analysis is a powerful method of solving non-linear algebraic equations. It works faster and is sure to converge in most cases…
