Measuring the Sine Wave: As the magnitude of the waveform is not constant, the Measuring the Sine Wave can be in different ways. These are instantaneous, peak, peak to peak, root mean square (rms) and…
Sine Wave Equation: A Sine Wave Equation is graphically represented as shown in Fig. 4.10(a). The amplitude of a sine wave is represented on vertical axis. The angular measurement (in degrees or radians) is represented…
Phase of Sine Wave: Phase of Sine Wave - A sine wave can be measured along the X-axis on a time base which is frequency-dependent. A sine wave can also be expressed in terms of…
The Sine Wave: Many a time, alternating voltages and currents are represented by a sinusoidal wave, or simply a sinusoid. It is a very common type of alternating, current (ac) and alternating voltage. The sinusoidal…
Thevenin Equivalent Circuit: In many practical applications, it is always not necessary to analyse the complete circuit; it requires that the voltage, current, or power in only one resistance of a circuit be found. The…
Principle of Superposition Theorem: The Principle of Superposition Theorem states that in any linear network containing two or more sources, the response in any element is equal to the algebraic sum of the responses caused…
Star Delta Control Circuit: The star delta transformation is another technique useful in solving complex networks. Basically, any three circuit elements, i.e. resistive, inductive or capacitive, may be connected in two different ways. One way…
Source Transformation Technique: Source Transformation Technique - In solving networks to find solutions one may have to deal with energy sources. It has already been discussed before that basically, energy Source Transformation are either voltage…
Supernode Analysis: Suppose any of the branches in the network has a voltage source, then it is slightly difficult to apply nodal analysis. One way to overcome this difficulty is to apply the Supernode Analysis.…
Nodal Analysis Examples: Nodal Analysis Examples - we discussed simple circuits containing only two nodes, including the reference node. In general, in a N node circuit, one of the nodes is chosen as reference or…
