Unijunction Transistor in Static Relay: Unijunction Transistor in Static Relay is a three terminal device with only one pn-junction. It is made up of n-type silicon wafer having two base controls and a p-type alloy…
Field Effect Transistor in Static Relay: Field Effect Transistor in Static Relay is a unipolar device as compared to bipolar transistor already discussed. It consists of a bar of semiconductor material whose resistance is modulated…
Transistor Use in Static Relay: Transistor Use in Static Relay - In its simplest form, it consists of two pn junction diodes coupled together by a very thin common base, either of p-type or n-type…
Semiconductor Diodes in Static Relays: Semiconductor Diodes in Static Relays - The pn junction has rectifying characteristics as shown in Fig. (10.1). If a source of emf is connected to the pn junction in the…
Hall Effect Relay Circuit: Hall Effect Relay Circuit is utilized to give a phase comparator. The effect is very predominant in certain semiconductors such as indium arsenide, indium antimonide, indium phosphate, etc. Figure (9.5) illustrates…
Transistor Relays: These are the most widely accepted type of static relays, so much so that when we say static relays, we can safely infer transistor relays only. The transistor which acts like an electronic…
Transductor Relay (Magnetic Amplifier Relay): Transductor Relay - Since relays now have to perform much more complicated functions, many types tend to become very complex mechanically, and hence costly, to make and difficult to test…
Electronic Relays: Electronic Relays - These were the first to be developed in the series of static relays. They date back to early 1928 when Fitzgerald presented a carrier current pilot relaying which constituted unit…
Static Relays Basics and Classification: A Static Relays Basics refers to a relay in which the measurement or comparison of electrical quantities is done in a static network which is designed to give an output…
Potential Transformer Tests: The three Potential Transformer Tests are namely, Polarity check, Ratio check and Phasing check. Polarity check: Polarity check in Potential Transformer Tests is performed in the same way as that for a…
