Working Principle of Automatic Gain Control: Working Principle of Automatic Gain Control is a system by means of which the overall gain of a radio receiver is varied automatically with…
Intermediate Frequency Amplifier: Choice of frequency: The Intermediate Frequency Amplifier (IF) of a receiving system is usually a compromise, since there are reasons why it should be neither low nor…
Transistor RF Amplifier Circuit: A radio receiver always has an RF section, which is a tunable circuit connected to the antenna terminals. It is there to select the wanted frequency…
Superheterodyne Principle: The block diagram of Figure 6-2 shows a basic superheterodyne receiver. In the Superheterodyne Principle, the incoming signal voltage is combined with a signal generated in the receiver.…
Noise and Frequency Modulation: Noise and Frequency Modulation is much more immune to noise than amplitude modulation and is significantly more immune than phase modulation. In order to establish the…
Theory of Frequency Modulation and Phase Modulation: Frequency Modulation and Phase Modulation is a system in which the amplitude of the modulated carrier is kept constant, while its frequency and…
Extensions of Single Sideband Amplitude Modulation: The Extensions of Single Sideband Amplitude Modulation is namely, Forms of Amplitude Modulation: This section on amplitude modulation defines, describes and lists the main applications…
Single Sideband: A brief, if not oversimplified, explanation of Single Sideband will help in understanding the transmission process. To begin, we must review some basic transmission processes. The physical length…