Radio Frequency Modulation
Radio Frequency Modulation: Radio Frequency Modulation - The simplest method of measuring frequency deviation utilises an FM receiver with a BFO as the measuring instrument. The only coupling used is…
Radio Frequency Modulation: Radio Frequency Modulation - The simplest method of measuring frequency deviation utilises an FM receiver with a BFO as the measuring instrument. The only coupling used is…
Vector Impedance Meter (Direct Reading): If some knowledge of the reactive and resistive factors is needed, in addition to obtaining a direct reading of the magnitude of the impedance (Z),…
Color Bar Generator: The composite video signal at the output of a video detector consists of luminance Y signals, the chrominance signal, the color burst, sync pulses and blanking pulses.…
Vertical Amplifier: The sensitivity (gain) and frequency bandwidth (B.W.) response characteristics of the oscilloscope are mainly determined by the vertical amplifier. Since the gain B.W. product is constant, to obtain…
Voltage Stability Analysis: The voltage stability analysis for a given system state involves examining following two aspects. Proximity to voltage instability: Distance to instability may be measured in terms of…
Types of Facts Controllers in Power System: The development of FACTS controllers has followed two different approaches. The first approach employs reactive impedances or a tap changing transformer with thyristor…
Vector Control of Induction Motor: The sole idea behind the vector control of induction motor is to have an electrical drive which must offer superior performance than widely used separately…
Types of Forced Commutation: It was observed from the discussion on choppers and inverters that in thyristor systems fed from dc supply, the forward current does not pass through zero…