Selection of Circuit Breaker: There are two types of Selection of Circuit Breaker ratings which require the computation of SC current are: (i) rated momentary current and (ii) rated symmetrical…
Introduction to Symmetrical Fault in Power System: Introduction to Symmetrical Fault in Power System devoted to abnormal system behavior under conditions of symmetrical short circuit (symmetrical three-phase fault). Such conditions…
Load Frequency Control of Isolated Power System: To obtain the dynamic response of Load Frequency Control of Isolated Power System giving the change in frequency as function of the time…
Load Frequency Control of Single Area System: Let us consider the problem of controlling the power output of the generators of a closely knit electric area so as to maintain…
Turbo Generator Excitation System: Power system operation considered so far was under conditions of steady load. However, both active and reactive power demands are never steady and they continually change…
Derivation of Transmission Loss Formula: An accurate method of obtaining a general derivation of transmission loss formula has been given by Kron. This, however, is quite complicated. The aim of…
Optimum Generation Scheduling: Optimum Generation Scheduling - From the unit commitment table of a given plant, the fuel cost curve of the plant can be determined in the form of…
Voltage Profile of Transmission Line: Control of Voltage Profile of Transmission Line at the receiving bus in the fundamental two-bus system was discussed already. Though the same general conclusions hold…