Determination of Diode Characteristics: Determination of Diode Characteristics - The forward characteristics of a diode can be obtained by use of the circuit depicted in Fig. 7.16 (a). The diode…
Pin Diagram of 8250 UART: Pin Diagram of 8250 UART - The UART stands for Universal Asynchronous Receiver Transmitter. The UART is used in parallel-to-serial and serial-to-parallel conversions. Actually, UART…
Bus Interface in Microprocessor: Bus Interface in Microprocessor - A microcomputer consists of a set of components such as CPU, memory, I/O device and these components communicate with each other…
AC Wheatstone Bridge: Impedances at AF or RF are commonly determined by means of an ac Wheatstone bridge. The diagram of an ac bridge is given in Fig. 11.17. This…
Transistor Testing Circuit: In-Circuit Testing - A quick test to check if a transistor is operational can be performed while the device is still connected in a circuit. Consider Fig.…
Testing of Semiconductor Diode: There are Several methods are available for Testing of Semiconductor Diode, namely, Ohmmeter Tests: One of the simplest and quickest tests can be made using an ohmmeter…
Brushless DC Motor Drives(Trapezoidal PMAC): The cross section of a 3-phase 2 pole Brushless DC Motor Drives is shown in Fig. 7.15. It has permanent magnet rotor with wide pole…
Synchronous Motors Types: Commonly used Synchronous Motors Types are: wound field, permanent magnet, synchronous reluctance and hysteresis motors. All these motors have a stator with a 3-phase winding, which is…