Solid Dielectrics Used in Practice
Solid Dielectrics Used in Practice: The majority of the insulating systems used in practice are solids. They can be broadly classified into three groups: organic materials, inorganic materials and synthetic…
Solid Dielectrics Used in Practice: The majority of the insulating systems used in practice are solids. They can be broadly classified into three groups: organic materials, inorganic materials and synthetic…
DC Distribution System: It is a common knowledge that electric power is almost exclusively generated, transmitted and disĀtributed as a.c. However, for certain applications, d.c. supply is absolutely necessary. For…
Electric Motor Cooling and Heating: The geometry of an Electric Motor Cooling is too complex to predict accurately the heat flow and temperature distribution. This is a difficult task. A…
Torque Speed Characteristics of Induction Motor: From Eq. 1.27 it can be observed that the maximum torque is independent of rotor resistance. However, the slip at which the maximum torque…
Characteristics of DC Motor: DC Motors are of the rotating armature type. The armature winding is a closed winding through the commutator. The armature is supplied through the brushes which…
Short Circuit of a Synchronous Machine on No Load: Short Circuit of a Synchronous Machine on No Load - Under steady state short circuit conditions, the armature reaction of a…
AC Series Motor: A series motor can be run from either dc or ac (single-phase) supply provided that both stator and rotor cores are laminated to limit the iron-loss. Figure…
Two Reaction Model of Salient Pole Synchronous Machine: In a Two Reaction Model of Salient Pole Synchronous Machine, the flux established by a mmf wave is independent of the spatial…