Amplifier Testing: Preparation - Transistor Amplifier Testing and other circuits should be tested in a methodical fashion; otherwise the results obtained may be useless. The circuit should first be carefully…
Transistor Testing Circuit: In-Circuit Testing - A quick test to check if a transistor is operational can be performed while the device is still connected in a circuit. Consider Fig.…
Common Base Transistor Characteristics: To investigate the Common Base Transistor Characteristics of a diode (a two-terminal device), several levels of forward or reverse bias voltage are applied and the resulting…
Testing of Semiconductor Diode: There are Several methods are available for Testing of Semiconductor Diode, namely, Ohmmeter Tests: One of the simplest and quickest tests can be made using an ohmmeter…
Antenna Characteristics: The following Antenna Characteristics isolated from surfaces which will alter or change their radiation patterns and efficiency. Current and Voltage Distribution: When an RF signal voltage is applied…
Communication Receiver Block Diagram: A Communication Receiver Block Diagram is one whose main function is the reception of signals used for communications rather than for entertainment. It is a radio…
Internal Noise in Communication System: Under the heading of Internal Noise in Communication System, we discuss noise created by any of the active or passive devices found in receivers. Such…
Measurement of High Voltage and Currents Articles: Series Resistance Microammeter: High d.c. voltages are usually measured by connecting a very high resistance (few hundreds of megaohms) in Series Resistance Microammeter…