High Voltage Test on Insulators
High Voltage Test on Insulators: The High Voltage Test on Insulators that are normally conducted are usually subdivided as Type tests and The routine tests. Type tests are intended to…
High Voltage Test on Insulators: The High Voltage Test on Insulators that are normally conducted are usually subdivided as Type tests and The routine tests. Type tests are intended to…
Classification of High Voltage Testing Methods: Classification of High Voltage Testing Methods are divided into two groups: Power Frequency Withstand Voltage Impulse withstand voltage Tests These tests together ensure the…
Partial Discharge Measurements: Earlier the testing of insulators and other equipment was based on the insulation resistance measurements, dissipation factor measurements and breakdown tests. It was observed that the dissipation…
High Voltage Schering Bridge: In the power frequency range (25 to 100 Hz) High Voltage Schering Bridge is a very versatile and sensitive bridge and is readily suitable for high…
Dielectric Constant and Loss: Many insulating substances have dielectric constant greater than unity and have Dielectric Constant and Loss when subjected to a.c. voltages. These two quantities, namely, the dielectric…
Insulation Coordination of Substation: For steep fronted lightning waves at Insulation Coordination of Substation and at different points on lines, the voltages at sub-stations may exceed the protective level depending…
Control of Switching Overvoltage: The Control of Switching Overvoltage and power frequency may be controlled by energization of transmission lines in one or more steps by inserting resistances and withdrawing…
Switching Surges in Transmission Line: Till the time when the transmission voltages were about 220 kV and below, over-voltages due to lightning were of very high order and overvoltages generated…