Multicavity Klystron
Multicavity Klystron: The design of the multicavity klystron, together with all the remaining tubes described here, relies on the fact that transit time will sooner or later terminate the usefulness…
Multicavity Klystron: The design of the multicavity klystron, together with all the remaining tubes described here, relies on the fact that transit time will sooner or later terminate the usefulness…
Radio Receivers Articles: Tuned Radio Frequency Receiver: The Tuned Radio Frequency Receiver is a simple “logical” receiver. A person with just a little knowledge of communications would probably expect all…
Receiver Types: There are Two Receiver Types namely, Pilot Carrier Receiver and a Suppressed Carrier Receiver; the suppressed carrier receiver incorporates a frequency synthesizer for extra stability and also is…
Ratio Detector Circuit: In the Foster-Seeley discriminator, changes in the magnitude of the input signal will give rise to amplitude changes in the resulting output voltage. This makes prior limiting…
Amplitude Limiter in FM Receiver: In order to make full use of the advantages offered by FM, a demodulator must be preceded by an Amplitude Limiter in FM Receiver, as…
Indirect Synthesizer: Indirect Synthesizer: The required frequency range in most synthesizers nowadays is obtained from a variable voltage-controlled oscillator (VCO), whose output is corrected by comparison with that of a…
Simple Diode Detector: Operation of diode detector: The Simple Diode Detector is by far the most common device used for AM demodulation (or detection), and its operation will now be…
Frequency Changing and Tracking in Receivers: The mixer is a nonlinear device having two sets of input terminals and one set of output terminals. The signal from the antenna or…