Standing Wave Ratio Measurements
Standing Wave Ratio Measurements: Standing wave are created along the length of a transmission line due to the mismatch between the characteristic impedance Z0 and the terminating impedance of the…
Standing Wave Ratio Measurements: Standing wave are created along the length of a transmission line due to the mismatch between the characteristic impedance Z0 and the terminating impedance of the…
Primary Standard: Primary Standard - One arrangement is a carefully designed quartz crystal oscillator operating in the range 50 to 100 kHz, having a low temperature coefficient, constant amplitude output…
Modem Definition: The term Modem Definition is an acronym for modulator-demodulator. The primary modem function is to convert digital data into an analog form which is suitable for transmission on…
Pulse Code Modulation(PCM): Pulse Code Modulation(PCM) is different from the other forms of pulse modulation studied so far, PCM also uses sampling techniques, but it differs from the others in…
Pulse Time Modulation(PTM): In Pulse Time Modulation the signal is sampled in the same way as in PAM, but the pulses indicating instantaneous sample amplitudes have a constant amplitude themselves.…
Sensors Based Computer Data Systems: This Sensors Based Computer Data Systems describes hardware/software which is commercially available at several levels of completeness, ranging from single board computer "front ends" to…
Compact Data Logger: Compact Data Logger - A typical unit provides 60 channels of data in a 20 x 40 x 60 cm box weighing about 20 kg. Most manufacturers…
Data Logger Summary: In general, a data logger is a comprehensive and highly advanced Data Logger Summary. It is made versatile and flexible, to render it suitable for widely varying…