Solid Dielectrics Used in Practice
Solid Dielectrics Used in Practice: The majority of the insulating systems used in practice are solids. They can be broadly classified into three groups: organic materials, inorganic materials and synthetic…
Solid Dielectrics Used in Practice: The majority of the insulating systems used in practice are solids. They can be broadly classified into three groups: organic materials, inorganic materials and synthetic…
Requirements of Satisfactory Electric Supply Connection: The Electric Supply Connection in India is 3-phase a.c. operating at a frequency of 50 Hz. The power station delivers power to consumers through…
Power Factor Improvement: The low power factor is mainly due to the fact that most of the power loads are inductive and, therefore, take lagging currents. In order for Power…
Low Power Factor: The Low Power Factor plays an importance role in ac. circuits since power consumed depends upon this factor. It is clear from above that for fixed power…
Power Factor: The electrical energy is almost exclusively generated, transmitted and distributed in the form of alternating current. Therefore, the question of power factor immediately comes into picture. Most of…
Margin Angle Control of Synchronous Motors: The commutation Margin Angle Control of Synchronous Motors is defined as the angle measured from the end of commutation to the crossing of the…
Methods to Leading Power Factor: We have seen that a phase controlled converter requires reactive power for control and commutation. The harmonics do not contribute to the active power loading…
Performance of DC Motors Operating on Phase Controlled Converters: The nature of the output voltage and output current of a phase controlled converters impains the performance of the dc motor…